Kubernetes Deployment Installation

This page details the installation instructions for deploying Cinchy v5 on Kubernetes

Table of Contents

1. Introduction

This page details the instructions for deployment of Cinchy v5 on Kubernetes. We recommend, and have documented below, that this is done via Terraform and ArgoCD. This setup involves a utility to centralize and streamline your configurations.

The Terraform scripts and instructions provided enable deployment on Azure and AWS cloud environments.

2. Deployment Prerequisites

The following lists are required prerequisites for installing Cinchy v5 on Kubernetes.

Note that some prerequisites will depend on whether you are deploying on Azure or on AWS.

2.1 All Platforms

These prerequisites apply whether you are installing on Azure or on AWS.

  • The following four Git repositories must be created. Any source control platform supporting Git may be used, e.g. Gitlab, Azure DevOps, Github

    • cinchy.terraform: This repo contains all Terraform configurations.

    • cinchy.argocd: This repo contains all ArgoCD configurations.

    • cinchy.kubernetes: This repo contains cluster and application component deployment manifests.

    • cinchy.devops.automations: This repo contains the single configuration file and binary utility that maintains the contents of the above three repositories.

  • Download the artifacts for the four Git repositories. See here for information on accessing these. Check the contents of each of the directories into the respective repository.

  • You must have a service account with read/write permissions to the git repos created above.

  • The following tools should be installed on the machine where the deployment will run:

  • If you are using Cinchy's docker images, pull them.

Starting in Cinchy v5.4, you will have the option between Alpine or Debian based image tags for the listener, worker, and connections. Using Debian tags will allow a Kubernetes deployment to be able to connect to a DB2 data source, and that option should be selected if you plan on leveraging a DB2 data sync.

  • When either installing or upgrading your platform, you can use the following Docker image tags for the listener, worker, and connections:

    • "5.x.x" - Alpine

    • "5.x.x-debian" - Debian

  • You will need a single domain for accessing ArgoCD, Grafana, Opensearch Dashboard, and any deployed Cinchy instances. There are two routing options for accessing these applications - path based or subdomains. See below for an example with multiple cinchy instances:

2.2 Azure Deployment

The following prerequisites are required if you are deployment Cinchy v5 on Azure.

  • Terraform Backend Requirements:

    • A resource group that will contain the Azure Blob Storage with the terraform state.

    • A storage account and container (Azure Blob Storage) for persisting terraform state.

  • The Azure CLI should be installed on the machine where the deployment will be run. It must be set to the correct profile/login

  • The deployment template has the option of either leveraging an existing resource group or creating a new one:

    • If an existing resource group is preferred, the prerequisite requires the following be provisioned in advance of the deployment:

      • The resource group.

      • A VNet within the resource group.

      • A single subnet. It's important that the address range be sufficient for all executing processes within the cluster, e.g. a CIDR ending with /22 to provide a range of 1024 IPs.

    • If a new resource group is preferred, all resources will be automatically provisioned.

  • The quota limit of the Total Regional vCPUs and the Standard DSv3 Family vCPUs (or equivalent) must provide sufficient availability for the required number of vCPUs (minimum of 24).

  • An AAD user account to connect to Azure, which has the necessary privileges to create resources in any existing resource groups and the ability to create a resource group (if required).

2.3 AWS Deployment

The following prerequisites are required if you are deployment Cinchy v5 on AWS.

  • Terraform Backend Requirements:

  • The AWS CLI should be installed on the machine where the deployment will be run. It must be set to the correct profile/login

  • The template has the option of either leveraging an existing VPC or creating a new one:

    • If an existing VPC is preferred, the prerequisite requires the following be provisioned in advance of the deployment:

      • The VPC. It's important that the address range be sufficient for all executing processes within the cluster, e.g. a CIDR ending with /21 to provide a range of 2048 IPs.

      • 3 Subnets (one per AZ). It's important that the address range be sufficient for all executing processes within the cluster, e.g. a CIDR ending with /23 to provide a range of 512 IPs.

      • If the subnets are private, a NAT Gateway is required to enable node group registration with the EKS cluster.

    • If a new VPC is preferred, all resources will be automatically provisioned.

  • The limit of the Running On-Demand All Standard vCPUs must provide sufficient availability for the required number of vCPUs (minimum of 24).

  • An IAM user account to connect to AWS which has the necessary privileges to create resources in any existing VPC and the ability to create a VPC (if required).

  • The SSL certificate must be imported into AWS Certificate Manager, or a new certificate can be requested via AWS Certificate Manager.

    • If your are importing it, you will need the PEM-encoded certificate body and private key. You can find this, you can get the PEM file from your chosen domain provider (GoDaddy, Google, etc.) Read more on this here.

Tips for Success:

  • Ensure that your region is configured the same across your SSL Certificate, your Terraform bucket, and your deployment.json in the next step of this guide.

3. Initial Configuration

The following steps detail the instructions for setting up the initial configurations.

3.1 Configure the Deployment.json

  1. Navigate to your cinchy.devops.automations repository where you will see an aws.json and azure.json.

  2. Depending on the cloud platform that you are deploying to, select the appropriate file and copy it into a new file named deployment.json (or <cluster name>.json) within the same directory.

  3. This file will contain the configuration for the infrastructure resources and the Cinchy instances to deploy. Each property within the configuration file has comments in-line describing its purpose along with instructions on how to populate it.

  4. Follow the guidance within the file to configure the properties.

5. Commit and push your changes.

Tips for Success:

  • You can return to this step at any point in the deployment process if you need to update your configurations. Simply rerun through the guide sequentially after making any changes.

  • The deployment.json will ask for your repo username and password, however ArgoCD may encounter errors when retrieving your credentials in certain situations (ex: if using Github). You can verify if your credentials have been picked up or not by navigating to the ArgoCD Settings once you have deployed Argo in step 7 of this guide. To avoid errors, we recommend using a Personal Access Token instead.

    Find more information here.

3.2 Execute cinchy.devops.automations

This utility updates the configurations in the cinchy.terraform, cinchy.argocd, and cinchy.kubernetes repositories.

  1. From a shell/terminal, navigate to the cinchy.devops.automations directory location and execute the following command:

dotnet Cinchy.DevOps.Automations.dll "deployment.json"

2. If the file created in "Configuring the Deployment.json" step 2 has a name other than "deployment.json", the reference in the command will will need to be replaced with the correct name of the file.

3. The console output should terminate with a "Completed successfully".

4. Terraform Deployment

The following steps detail how to deploy Terraform.

Cinchy.terraform Repo Structure - AWS

If deploying on AWS: Within the Terraform > AWS directory, a new folder named eks_cluster is created. Nested within that is a subdirectory with the same name as the newly created cluster.

To perform terraform operations, the cluster directory must be the working directory during execution. This applies to everything within step 4 of this guide.

Cinchy.terraform Repo Structure - Azure

If deploying on Azure: Within the Terraform > Azure directory, a new folder named aks_cluster is created. Nested within that is a subdirectory with the same name as the newly created cluster.

To perform terraform operations, the cluster directory must be the working directory during execution.

4.1 Cloud Provider Authentication

  1. Launch a shell/terminal with the working directory set to the cluster directory within the cinchy.terraform repo.

2. If you are using AWS, run the following commands to authenticate the session:

export AWS_DEFAULT_REGION=REGION
export AWS_ACCESS_KEY_ID=YOUR_ACCESS_KEY_ID
export AWS_SECRET_ACCESS_KEY=YOUR_ACCESS_KEY

3. If using Azure, run the following command and follow the on screen instructions to authenticate the session:

az login

4.2 Deploy the Infrastructure

  1. Execute the following command to create the cluster:

bash create.sh

2. Type yes when prompted to apply the terraform changes.

The resource creation process can take approx. 15-20 minutes. At the end of the execution there will be a section with the following header

======= Output Variables =======

If deploying on AWS, this section will contain 2 values: Aurora RDS Server Host and Aurora RDS Password

If deploying on Azure, this section will contain a single value: Azure SQL Database Password

These variable values are required to update the connection string within the deployment.json file (or equivalent) in the cinchy.devops.automations repo.

4.3 Retrieve the SSH Keys

The following section breaks down how to retrieve your SSH keys for both AWS and Azure deployments.

SSH keys should be saved for future reference in the event that a connection needs to be established directly to a worker node in the Kubernetes cluster.

4.3.1 AWS SSH Keys

  1. The SSH key to connect to the Kubernetes nodes is maintained within the terraform state and can be retrieved by executing the following command:

terraform output -raw private_key

4.3.2 Azure SSH Keys

  1. The SSH key is output to the directory containing the cluster terraform configurations.

5. Update the Deployment.json

The following section pertains to updating the Deployment.json file.

5.1 Update the Database Connection String

  1. Navigate to the the deployment.json (created in step 3.1) > cinchy_instance_configs section.

  2. Each object within represents an instance that will be deployed on the cluster. Each instance configuration contains a database_connection_string property. This has placeholders for the host name and password that must be updated using output variables from the previous section.

Note that in the case of an Azure deployment, the host name is not available as part of the terraform output and instead must be sourced from the Azure Portal.

5.2 Create the IAM User for S3 (AWS Only)

The terraform script will create an S3 bucket for the cluster that must be accessible to the Cinchy application components.

To access this programmatically, an IAM user that has read/write permissions to the new S3 bucket is required. This can be an existing user.

The Access Key and Secret Access Key for the IAM user must be specified under the object_storage section of the deployment.json

5.3 Update Blob Storage Connection Details (Azure Only)

  1. Within the deployment.json, the azure_blob_storage_conn_str must be set.

  2. The in-line comments outline the commands required to source this value from the Azure CLI.

5.3.1 Enabling Azure Key Vault Secrets

If you have the key_vault_secrets_provider_enabled=true value in the azure.json then the below secrets files would have been created during the execution of step 3.2:

You will need to add the following secrets to your azure key vault:

  • worker-secret-appsettings-<cinchy_instance_name>

  • web-secret-appsettings-<cinchy_instance_name>

  • maintenance-cli-secret-appsettings-<cinchy_instance_name>

  • idp-secret-appsettings-<cinchy_instance_name>

  • forms-secret-config-<cinchy_instance_name>

  • event-listener-secret-appsettings-<cinchy_instance_name>

  • connections-secret-config-<cinchy_instance_name>

  • connections-secret-appsettings-<cinchy_instance_name>

To create your new secrets:

  1. Navigate to your key vault in the Azure portal.

  2. Open your Key Vault Settings and select Secrets.

  3. Select Generate/Import.

  4. On the Create a Secret screen, choose the following values:

    1. Upload options: Manual.

    2. Name: Choose the secret name from the above list. They will all follow the format of: <app>-secret-appsettings-<cinchy_instance_name> or <app>-secret-config-<cinchy_instance_name>

    3. Value: The value for the secret will be the content of each app JSON located in the cinchy.kubernetes\environment_kustomizations\nonprod<cinchy_instance_name>\secrets folder, and as shown in above image.

    4. Content type: JSON

  5. Leave the other values to their defaults.

  6. Select Create.

Once you receive the message that the first secret has been successfully created, you may proceed to create the other secrets. There are a total of 8 secrets to create as shown in the above list of secret names.

5.4 Execute cinchy.devops.automations

This utility updates the configurations in the cinchy.terraform, cinchy.argocd, and cinchy.kubernetes repositories.

  1. From a shell/terminal, navigate to the cinchy.devops.automations directory and execute the following command:

dotnet Cinchy.DevOps.Automations.dll "deployment.json"

2. If the file created in section 3 has a name other than "deployment.json", the reference in the command will will need to be replaced with the correct name of the file.

3. The console output should terminate with a "Completed successfully".

4. The updates must be committed to Git before proceeding to the next step.

6. Connect with kubectl

6.1 Update the Kubeconfig

6.1.1 AWS

  1. From a shell/terminal run the following command, replacing <region> and <cluster_name> with the accurate values for those placeholders:

aws eks update-kubeconfig --region <region> --name <cluster_name>

6.1.2 Azure

  1. From a shell/terminal run the following commands, replacing <subscription_id>, <deployment_resource_group>, and <cluster_name> with the accurate values for those placeholders.

These commands with the values pre-populated can also be found from the Connect panel of the AKS Cluster in the Azure Portal.

az account set --subscription <subscription_id>
az aks get-credentials --admin --resource-group <deployment_resource_group> --name <cluster_name>

6.2 Verify the Connection

  1. Verify that the connection has been established and the context is the correct cluster by running the following command:

kubectl config get-contexts

7. Deploy and Access ArgoCD

In this step, we will deploy and access ArgoCD.

7.1 Deploy ArgoCD

  1. Launch a shell/terminal with the working directory set to the root of the cinchy.argocd repository.

  2. Execute the following command to deploy ArgoCD:

bash deploy_argocd.sh

3. Monitor the pods within the argocd namespace by running the following command every 30 seconds until they all move into a healthy state:

kubectl get pods -n argocd

7.2 Access ArgoCD

  1. Launch a new shell/terminal with the working directory set to the root of the cinchy.argocd repository.

  2. Execute the following command to access ArgoCD:

bash access_argocd.sh

This script creates a port forward using kubectl to enable ArgoCD to be accessed at http://localhost:9090

The credentials for ArgoCD's portal are output at the start of the access_argocd's script execution in Base64. The Base64 value must be decoded to get the login credentials to use for the http://localhost:9090 endpoint.

8. Deploy Cluster Components

In this step, you will deploy your cluster components.

8.1 Deploy ArgoCD Applications

  1. Launch a shell/terminal with the working directory set to the root of the cinchy.argocd repository.

  2. Execute the following command to deploy the cluster components using ArgoCD:

bash deploy_cluster_components.sh

3. Navigate to ArgoCD at http://localhost:9090 and login. Wait until all components are healthy (this may take a few minutes).

Tips for Success:

  • If your pods are degraded or failed to sync, refresh of resync your components. You can also delete pods and ArgoCD will automatically spin them back up for you.

  • Check that ArgoCD is pulling from your git repo by navigating to your Settings

  • If your components are failing upon attempting to pull an image, refer to your deployment.json to check that each component is set to the correct version number.

8.2 Update the DNS

  1. Execute the following command to get the External IP used by the istio ingress gateway.

kubectl get svc -n istio-system

2. DNS entries must be created using the External IP for any subdomains / primary domains that will be used, including Opensearch, Grafana, and ArgoCD.

8.3 Accessing Opensearch

The default path to access Opensearch, unless you have configured it otherwise in your deployment.json, is <baseurl>/dashboard

The default credentials for accessing Opensearch are admin/admin. We recommend that you change these credentials the first time you log in to Opensearch.

To change the default credentials for Cinchy v5.4+, follow the documentation here.

To change the default credentials and/or add new users for all other deployments, follow this documentation or navigate to Settings > Internal Roles in Opensearch.”

8.4 Accessing Grafana

The default path to access Grafana, unless you have configured it otherwise in your deployment.json, is <baseurl>/grafana

The default username is admin. The default password for accessing Grafana can be found by doing a search of "adminPassword" within the following path: cinchy.kubernetes/cluster_components/metrics/kube-prometheus-stack/values.yaml

We recommend that you change these credentials the first time you access Grafana. You can do so through the admin profile once logged in.

9. Deploy Cinchy Components

In this step, you will deploy your Cinchy components.

9.1 Deploy ArgoCD Application

  1. Launch a shell/terminal with the working directory set to the root of the cinchy.argocd repository.

  2. Execute the following command to deploy the Cinchy application components using ArgoCD:

bash deploy_cinchy_components.sh

3. Navigate to ArgoCD at http://localhost:9090 and login. Wait until all components are healthy (may take a few minutes)

4. You will be able to access ArgoCD through the URL that you configured in your deployment.json, as long as you created a DNS entry for it in step 8.2.

You have now finished the deployment steps required for Cinchy. Navigate to your configured domain URL to verify that you can login using the default username (admin) and password (cinchy).

10. Troubleshooting

  • If ArgoCD Application Sync is stuck waiting for PreSync jobs to complete, you can run the below command to restart the application controller.

kubectl rollout restart sts argocd-application-controller -n argocd

Last updated